| Material | |
|---|---|
| Cable End Screw Nut | Zn Alloy‚ Ni Plating |
| USB Receptacle Housing | PBT |
| USB Receptacle Contacts | Copper Alloy‚ Au Plating |
| USB Receptacle Shell | Copper Alloy‚Ni Plating |
| Cable End Rubber Pad | Silicone |
| Inner Mold | PE |
| Over Mold | PVC |
| Technical Data | |
| Insulation Resistance | DC500V±10%‚test for 1 minute and the insulation resistance should be more than 100MΩ |
| Dielectric Withstanding Voltage | 500 V DC/AC peak‚ contact-to-contact‚ for 1 minute. 750 V DC/AC peak‚ contact-to-test panel or contact-to-shield for 1 minute. |
| Contact Resistance | 30mΩ at 10mA Max. |
| Durability | 1‚500cycles insertion/extraction cycles at a maximum rate of 200 cycles per hour |
| Thermal Shock | 5 cycles at -40° / +105°‚after the test‚ the function and appearance can't be impacted. |
| Waterproof Test | Submersion in water 1 meter for 30 minutes. |